Standard Colors for Your Underground Utilities

Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Calling 811 is enough for the property owner to let companies located their lines.

It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.

If you see white lines, then these are proposed excavation sites. You can mark areas with white lines that will soon be excavated.

If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

If you want to learn more about utility lines click here now! View here for more.

Suggested Post: webpage